7" Wall Sleeve (500mm Length)
£40.52
In stock
SKU
DWWS107
7" Wall Sleeve (500mm Length) is available to buy in increments of 1
- 7" Twin Wall Sleeve
- Made From Steel
- For Use When Burning, Wood, Gas, Oil, Low Sulphur Coal
7" Wall Sleeve (500mm Length)
Used to go through the wall at 90° and to sheild the twin wall system from any combustible material and to maintain a 6mm air gap around the flue.
Component Type | Accessories |
---|---|
Dimensions | |
Designation: | EN1856-1 T450 N1 D V3- L50040 G60 |
Installation Guide: | Our twin wall insulated flue is a simple push fit joint system. To create and maintain a continuous length, the twin wall pieces push together and with the aid of a locking band (provided with each length) secure the connection between each piece. The push fit system remains the easiest method of installation to date. |
Recommended Fuels: | Gas, Oil, Pellet, Wood, Smokeless Fuels |
Building Regulations : | We recommend that all installations are carried out by a qualified chimney installer. additional information on installation and requirements can be found below. |
Material : | Steel |