6" 20° - 45° Roof Flashing (Rubber High Temp)
£60.70
In stock
SKU
DWRF0106
6" 20° - 45° Roof Flashing (Rubber High Temp) is available to buy in increments of 1
- 6" Twin Wall Flashing
- High Temperature Rubber
- Aluminium Based
- For Use When Burning, Wood, Gas, Oil, Low Sulphur Coal
6" 20° - 45° Roof Flashing (Rubber High Temp)
High Temp Rubber Flashing (20° to 45°) with an aluminium base, used to weather-proof the system on exit from the roof.
Made with a high temperature resistant rubber upstand and a heavy duty aluminium base.
Component Type | Roof Flashings |
---|---|
Designation: | EN1856-1 T450 N1 D V3- L50040 G60 |
Installation Guide: | Our twin wall insulated flue is a simple push fit joint system. To create and maintain a continuous length, the twin wall pieces push together and with the aid of a locking band (provided with each length) secure the connection between each piece. The push fit system remains the easiest method of installation to date. |
Recommended Fuels: | Gas, Oil, Pellet, Wood, Smokeless Fuels |
Building Regulations : | We recommend that all installations are carried out by a qualified chimney installer. additional information on installation and requirements can be found below. |
Material : | Stainless Steel |