5" Twin Wall Adaptor to Colt Cowl
- Used to terminate the insulation at the top of the system and connect to the rotor vent.
- 316 Stainless Steel.
Twin Wall 5" Adaptor to Colt Cowl Mini Rotorvent
Twin Wall Adaptor to connect to the colt cowl mini rotorvent. Used to close off the insulation at the top of the system and connect to the rotor vent.
(M3 Bolts required, not supplied with this unit.)
Component Type | Adaptors |
---|---|
Designation: | EN1856-1 T450 N1 D V3- L50040 G60 |
Installation Guide: | Our twin wall insulated flue is a simple push fit joint system. To create and maintain a continuous length, the twin wall pieces push together and with the aid of a locking band (provided with each length) secure the connection between each piece. The push fit system remains the easiest method of installation to date. |
Recommended Fuels: | Gas, Oil, Logs, Peat and Smokeless Fuels |
Building Regulations : | We recommend that all installations are carried out by a qualified chimney installer. additional information on installation and requirements can be found below. |
Material : | Stainless Steel |