3" - 5" Increasing Stove Adaptor (316 1mm)
Key Features:
- Durable Construction: Crafted from premium Single Skin 316 stainless steel, ensuring long-lasting performance and resistance to corrosion.
- Optimal Thickness: The 1mm thickness provides the perfect balance of sturdiness and heat conductivity, enhancing your stove's overall efficiency.
- Seamless Compatibility: Designed to seamlessly integrate with a variety of stove pipes, making it a versatile choice for different setups.
- Easy Installation: The adaptor is user-friendly, allowing for a quick and hassle-free installation process. Spend less time on setup and more time enjoying your stove.
- Enhanced Airflow: Facilitates improved airflow, optimizing combustion and ensuring that your stove operates at its peak performance.
Enhance Your Stove's Performance with Our Single Skin 316 1mm Stove Pipe Increasing Adaptor
Upgrade your stove system with our high-quality Single Skin 316 1mm Stove Pipe Increasing Adaptor. Engineered for efficiency and durability, this adaptor is a must-have for any stove enthusiast. The increase can be upto 2” larger than the initial size.
Application:
The 316 stainless steel is designed primarily for high temperature applications in the domestic market for gas, oil, solid and multi-fuel installations. Appliances will burn with flue gas temperatures of up to 600°C for the 1mm, under continuous firing and is soot resistant.
This product is also suitable for use on some commercial applications.
Benefits You'll Love:
- Efficient Heating: Experience faster and more efficient heating with our carefully designed adaptor.
- Longevity: Invest in a product that stands the test of time, providing reliable performance for years to come.
- Versatility: Adapt to different stove setups effortlessly, thanks to the universal compatibility of our increasing adaptor.
- Easy Maintenance: Spend less time on maintenance and more time enjoying the warmth of your stove.
- Peace of Mind: Trust in the durability and quality of Single Skin 316 stainless steel for a worry-free stove experience.
Upgrade your stove system today with our Single Skin 316 1mm Stove Pipe Increasing Adaptor. Enjoy the perfect blend of performance, durability, and ease of use.
| Component Type | Adaptors |
|---|---|
| Designation: | EN 1856-1 T600 N1 D V2L50040 G100 |
| Installation Guide: | Installing Your ProductThe 316 should be installed (a minimum of 3 x diameter) from any combustible materials, e.g. 125mm pipe should be 375mm from combustible materials. Can be used as a substitute for a flexible flue liner. The 316 stainless steel must only be used to connect from the appliance to flexible liner or twin wall insulated system. It must NOT be used externally and where there is a risk of combustibles being placed next to the chimney, the minimum distances to combustibles must be maintained whether by a permanent enclosure or shield. Please refer to the Document J Building regulations for more information. The 316 should be fitted with socket uppermost, spigot (male end) downward to avoid condensate escaping. Each joint should be sealed with fire cement or high temperature silicone sealant to ensure a gas tight fit. Where 316 single wall flue passes through a brick internal wall, it is recommended a wall sleeve is used around the pipe. Provision for sweeping and inspections must be made. The chimney diameter should never be reduced to less than the diameter specified by the appliance manufacturer. An Ensure that adequate air is available for combustion. Components must NOT be modified for safety reasons. A chimney notice plate and carbon monoxide detector must be installed in the building, preferably in the same room as the appliance. The installation must be commissioned by a registered installer in-line with the Building Regulations (Document J). If there are any leaks or issues with the system, it must not be used until the problems have been rectified. Provisions must be made for condensate drainage where appropriate. Please refer to the Document J Building regulations for more information. |
| Recommended Fuels: | Gas, oil, solid and multi-fuel |
| Building Regulations : | We recommend that all installations are carried out by a qualified chimney installer. additional information on installation and requirements can be found below. |
| Material : | Stainless Steel |
