4" Gas Flue Liner
£16.93
In stock
SKU
NCGF04
4" Gas Flue Liner is available to buy in increments of 1
Please Note: Price is per Meter
- 4" Gas Liner
- Stainless Steel Construction
- NOT SUITABLE FOR SOLID FUEL APPLICATIONS
- On all gas appliances, please refer to your appliance manufacturers handbook
to ensure you purchase the correct liner for your gas installation. - Our gas liners have a Class (2) industry certification,
are tested to BS715 and have CE approval.
4" (100mm) Gas Flue Liner
Our Gas Flue Liner is made with an overlap of metal which is continously welded. This creates the ultimate seal. Completely gas and water tight, yet still incredibly flexible.
Built with high quality 316 grade stainless steel, which is constantly monitored for tolerance, consistency and conformance to specification.
| Component Type | Flue Liner |
|---|---|
| Designation: | T600 P2 W Vml50010 G |
| Installation Guide: | The liner is used to re-line your existing chimney, the liner should always be fitted from the top before you start secure the NOSE cone (order separately) onto the end of the liner making sure the arrows on the liner are pointing away from the nose cone in a upward direction. When the liner is installed the arrows will be pointing to the top of the chimney, pull the liner down the chimney using a draw string which is'nt supplies with the Nose cone at the same time have someone at the top of the chimney feeding the liner down, once the liner is fitted remove the nose cone. |
| Recommended Fuels: | Gas, Oil |
| Building Regulations : | We recommend that all installations are carried out by a qualified chimney installer. additional information on installation and requirements can be found below. |
| Material : | Stainless Steel |
