7" - 8" Increasing Adaptor (Single to flex)
- Adaptor for increasing from 7" Single Skin Flue to 8" Flexible Chimney Liner.
- Manufactured from 316 Stainless Steel
7" (175mm) - 8" (200mm) Increasing Flue Adaptor
Use this item to Connect 7" Woodstove Pipe to 8" Flexible Flue Liner at the base of your Chimney Stack.
Firstly secure the Chimney Liner to the Adaptor .
Slide the Chimney liner into the top of the adaptor and secure by inserting self tapping screws into the Holes provided on the outside skin of the Adaptor .
Add some fire cement of Silicone Sealant to the joint to make sure your connection is sealed.
Insert the Single Skin Spigott into your Stove / Appliance and once again seal with Fire Cement or High Temp Silicone Sealant.
Do not worry if the Adaptor Is loose before sealing with Fire cement as All Adaptors are made to be universal to fit any of the 1,000.00 Stoves there are on the Market Today .
|Recommended Fuels:||Wood, Gas, Oil, Occasional House Coals|
|Building Regulations :||
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.
|Material :||Stainless Steel|