7" 316 / 316 Ultraflex Chimney Liner
Please Note: Price is per Meter
- 7" Solid fuel/ Multi fuel Flexible Chimney Liner
- 316 Stainless Steel Construction
- Triple Lock Joints
- Suitable for burning the following fuels: dried seasoned wood, gas, oil.
This Product has a Lifetime Manufacturers Guarantee*
7" (175mm) 316/316 Multi Fuel Chimney Liner
Manufactured from 0.12mm Thick Stainless Steel on Both Inner and Outer Skin .
Our Competitors Tend to Use 0.10mm Thick Stainless Steel which is Equal to 20% Less Steel per Mtr , So buyer beware it may seem cheap but its Cheap for a Reason.
*Lifetime guarantee is the length of time you live at the property
|Component Type||Flue Liner|
|Designation:||EN 1856-2 T600 P1 W VmL50012 G|
|Installation Guide:||The liner is used to re-line your existing chimney, the liner should always be fitted from the top before you start secure the NOSE cone (order separately) onto the end of the liner making sure the arrows on the liner are pointing away from the nose cone in a upward direction. When the liner is installed the arrows will be pointing to the top of the chimney, pull the liner down the chimney using a draw string which is'nt supplies with the Nose cone at the same time have someone at the top of the chimney feeding the liner down, once the liner is fitted remove the nose cone.|
|Recommended Fuels:||Wood, Gas, Oil, Occasional House Coals|
|Building Regulations :||
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.