Used for insulation around flexible flue liner to reduce the possibility of condensation and protects the liner from harsh weather conditions. This will help increase the life span of the flue liner.
The FlexWrap system comprises various sized flexible insulated flue liners to suit all sizes and type of flues.
Benefits:
Easy to install
Different sized wraps can be used together to suit any length of flue
Cost effective solution
It has a secured fixing method incorporating a Velcro strip along its length together with two effective straps secured by ‘D’ rings to prevent anything catching the wrap in the chimney.
Wrap the liner around the flue ensuring that the straps are on the outside and the overlap piece on the end is facing towards the direction of any anticipated join.
Pull the Velcro and fasten evenly.
Pull lowest strap through both D-Rings before threading back between the two D-Rings in the opposite direction.
As above with all straps until you reach the top of the liner.
Pull all straps tightly through the D-Rings to finish with a snug fit.
If adding a further liner to the same flue, start the bottom of the next liner over the overlap piece so that both liners are facing in the same direction.
Installation Guide:
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.