7" Flat Roof Flashing (Steel Based)
- 7" Twin Wall Flashing
- Steel Component.
- For Use When Burning, Wood, Gas, Oil, Low Sulphur Coal
-
This Product has a 25 year Manufacturers Guarantee
Please Be Advised
You will require a Storm Collar when installing your flashing to cover the air gap between the top of the flashing and the flue pipe once installed
The hole on this flashing will be 9" external diameter, to match the external diameter of the 9" twin wall. Do note that the hole may be a bit larger than 9" and the purchase of a storm collar is required in addition to the flashing.
7" Flat Roof Flashing (Steel Based)
Flat roof flashing with stainless steel upstand to weatherproof your installation.
A Storm Collar is required with the installation of this product.
Component Type | Roof Flashings |
---|---|
Dimensions | |
Designation: | EN1856-1 T450 N1 D V3- L50040 G60 |
Installation Guide: | Our twin wall insulated flue is a simple push fit joint system. To create and maintain a continuous length, the twin wall pieces push together and with the aid of a locking band (provided with each length) secure the connection between each piece. The push fit system remains the easiest method of installation to date. |
Recommended Fuels: | Wood, Oil, Gas, Low Sulpher Coal |
Building Regulations : | We recommend that all installations are carried out by a qualified chimney installer. additional information on installation and requirements can be found below. |
Material : | Stainless Steel |