6" - 7" Increasing Adaptor

£39.52 Excl. VAT per item
In stock
SKU
UFIA07
  • Adaptor for increasing from 6" Single Skin Flue to 7" Flexible Chimney Liner.
  • Manufactured from 316 Stainless Steel

6" (150mm) - 7" (175mm) Increasing Flue Adaptor

Use this item to Connect 6" Woodstove Pipe to 7" Flexible Flue Liner at the base of your Chimney Stack.

.

More Information
Dimensions
Product TypeAdaptors
ColourStainless Steel
MaterialStainless Steel
Installation Guide :

Firstly secure the Chimney Liner to the Adaptor .

Slide the Chimney liner into the top of the adaptor and secure by inserting self tapping screws into the Holes provided on the outside skin of the Adaptor .

Add some fire cement of Silicone Sealant to the joint to make sure your connection is sealed.

Insert the Single Skin Spigott into you Stove / Appliance and once again seal with Fire Cement or High Temp Silicone Sealant.

Building Regulations

We recommend that all installations are carried out by a qualified chimney installer.

additional information on installation and requirements can be found below.

 pdf documentDownload Document J Regulations

Loading...
Company Information:
We remain fully open to all our Customers
Copyright © 2018-present National Chimney Supplies, Inc. All rights reserved.