5" - 6" Increasing Register Plate Adaptor
£53.55
In stock
SKU
UFRPIA06
- 300mm x 300mm Plate
- Increases Diameter by 1"
- Connects to Flue Liner & Stove Pipe
- Stainless Steel
5" - 6" Increasing Register Plate Flue Adaptor
Connects 6" diameter flue liner to 5" stove pipe at the bottom of the chimney stack.
- 300mm x 300mm Plate
- Stainless Steel
| Component Type | Adaptors |
|---|---|
| Dimensions |
|
| Installation Guide: | INSTALLATION GUIDESecure the bottom of the liner to the adaptor using self tapping screws and seal with either fire cement/silicone sealant. Use the same procedure to connect adaptor to either your appliance or vitreous/single wall flue pipe. |
| Recommended Fuels: | Gas, Oil, Cured Dry Logs, Cured Dry Peat and Smokeless Fuels |
| Building Regulations : | We recommend that all installations are carried out by a qualified chimney installer. additional information on installation and requirements can be found below. |
| Material : | Stainless Steel |
