4" 500mm Length Stove Pipe

£23.84 Excl. VAT per item
In stock
  • 4" Premium Vitreous Enamel Stove Pipe
  • 10 Year manufacturer Warranty
  • Used for Burning Wood, Gas, Oil, Low Sulphur Coal, Pellets
  • 1.2mm Thick
  • Matt Black Enamel Coated

4" 500mm Length Vitreous Stove Pipe

Single Wall straight length which can be easily combined to acheive the desired flue run.

Always face the male end downwards when installing to ensure any moisture flows down the internal pipe.

More Information
Product TypeLengths
ColourMatt Black
MaterialStainless Steel
Recommended Fuels :Wood, Gas, Oil, Low Sulphur Coal, Pellets
Installation Guide :

You should not install any piece of Vitreous with-in 3 x the internal diameter from combustible material eg: plaster board ceilings/wood etc, a 6" diameter piece of Vitreous should be 18" away from combustible materials ,

Each joint made should be sealed with Fire cement. Vitreous Flue pipe is only to be used as a connecting piece of flue between the appliance (EG: woodstove) and the flue liner or chimney stack.

Please make sure you buy the correct Adaptor to connect your Stove pipe to Flexible liner or Twin Wall Flue System.

Building Regulations

We recommend that all installations are carried out by a qualified chimney installer.

additional information on installation and requirements can be found below.

 pdf documentDownload Document J Regulations

External Diameter100mm
Copyright © 2018-present National Chimney Supplies, Inc. All rights reserved.